bannerny

products

Well-designed Kalrez Ffkm - General Purpose Fluoroelastomer Base Polymer – FUDI

short description:


Stock Sample is Free & Available

Product Detail

Product Tags

Related Video

Feedback (2)

continue to improve, to ensure product quality in line with market and customer standard requirements. Our company has a quality assurance system have been established for Fkm Gasket, oring ffkm, vapor phase silicone, Welcome buddies from all over the earth come to visit, tutorial and negotiate.
Well-designed Kalrez Ffkm - General Purpose Fluoroelastomer Base Polymer – FUDI Detail:

Viton FKM raw gum is raw material of viton rubber. We supply Chinese best quality of Viton FKM raw gum including Low Mooney, Middle Mooney and high Mooney grades.

FD26 serial FKM raw gum is one kind of copolymer composed of vinylidene fluoride (VDF) and hexafluoropropylene (HFP). It’s a standard type of FKM showing a good overall performance. You may find general properties of the material in below table.

Items

Grades

FD2601 FD2602 FD2603 FD2604 FD2605
Density (g/cm3) 1.82±0.02 1.82±0.02 1.82±0.02 1.82±0.02 1.82±0.02
Fluorine content (%) 66 66 66 66 66
Mooney Viscosity (ML (1+10)121℃) 25 40~45 60~70 >100 150
Tensile strength after post cure (Mpa) 24h, 230℃ ≥11 ≥11 ≥11 ≥13 ≥13
Elongation at break after post cure (%)24h, 230℃ ≥180 ≥150 ≥150 ≥150 ≥150
Compression set (%) 70h, 200℃

≤25

FD24 serial FKM raw gum is one kind of terpolymer composed of vinylidene fluoride (VDF), hexafluoropropylene (HFP) and tetrafluoroethylene (TFE). Terpolymers have a higher fluorine content compare to copolymers (typically between 68 and 69 weight percent fluorine), which
results in better chemical and heat resistance. You may find general properties of the material in below table.

FD2462 FD2463 FD2465 FD2465L FD2465H
Fluorine Content 68.5 68.5 68.5 65 69.5
Density (g/cm3) 1.85 1.85 1.85 1.81 1.88
Mooney Viscosity (ML (1+10)121℃) 70±10 40±10 45±15 50±10 40±20
Tensile strength after post cure (Mpa) 24h, 230℃ ≥11 ≥11 ≥11 ≥11 ≥11
Elongation at break after post cure (%)24h, 230℃ ≥180 ≥180 ≥180 ≥180 ≥180
Compression set (%) 200℃ 70H compress 20% ≤30% ≤30% ≤30% ≤30% ≤40%
Oil resistance (200℃ 24H) RP-3 oil ≤5% ≤5% ≤5% ≤5% ≤2%
Glass transition temperature (TG) >-15℃ >-15℃ >-15℃ >-21℃ >-13℃
Water content (%) ≤0.15 ≤0.15 ≤0.15 ≤0.15 ≤0.15

Package and Storage

Fluoroelastomer are first sealed in PE bag-weights 5kgs per bag, then put into carton box. Net weight per box: 25kgs

Fluoreolastomer should be stored in a cool, dry and ventilated place. Shelf life is 24 months since production date.


Product detail pictures:

Well-designed Kalrez Ffkm - General Purpose Fluoroelastomer Base Polymer – FUDI detail pictures

Well-designed Kalrez Ffkm - General Purpose Fluoroelastomer Base Polymer – FUDI detail pictures

Well-designed Kalrez Ffkm - General Purpose Fluoroelastomer Base Polymer – FUDI detail pictures


Related Product Guide:

Our improvement depends on the superior equipment, excellent talents and continuously strengthened technology forces for Well-designed Kalrez Ffkm - General Purpose Fluoroelastomer Base Polymer – FUDI , The product will supply to all over the world, such as: Philippines, Egypt, Doha, We can meet the various needs of customers at home and abroad. We welcome new and old customers to come to consult & negotiate with us. Your satisfaction is our motivation! Allow us to work together to write a brilliant new chapter!
  • This is the first business after our company establish, products and services are very satisfying, we have a good start, we hope to cooperate continuous in the future!
    5 Stars By Eartha from Lithuania - 2017.06.19 13:51
    The supplier abide the theory of "quality the basic, trust the first and management the advanced" so that they can ensure a reliable product quality and stable customers.
    5 Stars By Rigoberto Boler from Suriname - 2017.04.28 15:45
    Write your message here and send it to us