Factory Outlets Fkm Curatives – Bishphenol Curable Fluoroelastomer copolymer – FUDI
Stock Sample is Free & Available
Factory Outlets Fkm Curatives – Bishphenol Curable Fluoroelastomer copolymer – FUDI Detail:
Viton® Fluoroelastomer are referred to as FKM or FPM polymers. It is one class of synthetic rubber which provide extraordinary resistance to chemicals, oil and heat, while providing useful service life about 230 C. It is used in a wide variety of high-performance applications.
Aerospace: O-ring seals in fuel and hydraulic systems, manifold gaskets, fuel tank bladders, engine hose, clips for jet engines, tire valve stem seals.
Automotive: Shaft seals, valve stem seals, fuel injector o-rings, fuel hoses, gaskets.
Industrial: Hydraulic O-ring seals, diaphragms, electrical connectors, valve liners, sheet stock/ cut gaskets.
Sichuan Fudi can supply
● O-ring and gasket grade Fluoroelastomer
● For oil seals bonding grade Fluoroelastomer
● For hose extrusion grade Fluoroelastomer
● Low temperature grade Fluoroelastomer
● High Fluorine contained Fluoroelastomer
● Bisphenol and Peroxide curable grades Fluoroelastomer
● Copolymer and Terpolymer grades Fluoroelastomer
FKM Precompound is mixing of fkm fluoroelastomer raw gum and curing agents. It can divide into two types based on application-molding grade and extrusion grade. According to formulation, it can be divided into copolymer and terpolymer, bisphenol curable and peroxide curable grade.
Viton FKM also known as Fluoroelastomer. It is one class of synthetic rubber which provide extraordinary resistance to chemicals, oil and heat, while providing useful service life about 230 C.
Technical Data
| Items |
Grades |
|||
| FD2640 | FD2617P | FD2617PT | FD246G | |
| Density (g/cm3) | 1.81 | 1.81 | 1.81 | 1.86 |
| Fluorine content (%) | 66 | 66 | 66 | 68.5 |
| Tensile strength (Mpa) | 16 | 14.7 | 16 | 16 |
| Elongation at break (%) | 210 | 270 | 270 | 280 |
| Compression set, % (24h, 200℃) | 12 | 14 | 14.6 | / |
| Processing | Molding | Molding | Molding | Extrusion |
| Application | O-ring | Oil Seal | O ring and oil seal | Rubber hose |
Equivalent Brand of FKM
| FUDI | Dupont Viton | Daikin | Solvay | Applications |
| FD2614 | A401C | G7-23(G701 G702 G716) | Tecnoflon® FOR 80HS | Mooney Viscosity about 40, fluorine contains 66%, copolymer designed for compression molding. High recommended for O-rings, gaskets. |
| FD2617P | A361C | G-752 | Tecnoflon® FOR 5312K | Mooney Viscosity about 40, fluorine contains 66%, copolymer designed for compression, transfer and injection molding. High recommended for oil seals. Good metal bonding properties. |
| FD2611 | A201C | G-783, G-763 | Tecnoflon® FOR 432 | Mooney Viscosity about 25, fluorine contains 66%, copolymer designed for compression and injection molding. High recommended for O-rings and gaskets. Excellent mold flow and mold release. |
| FD2611B | B201C | G-755, G-558 | Mooney Viscosity about 30, fluorine contains 67%, teopolymer designed for extrusion. High recommended for fuel hose and filler neck hose. |
Package
25kgs per carton, 500kgs per pallet
Carton: 40cm*30cm*25cm
Pallet: 880mm*880mm*840mm
Product detail pictures:
Related Product Guide:
We're proud from the higher client fulfillment and wide acceptance due to our persistent pursuit of high quality both on product and service for Factory Outlets Fkm Curatives – Bishphenol Curable Fluoroelastomer copolymer – FUDI , The product will supply to all over the world, such as: Nigeria, Seattle, Lesotho, With all these supports, we can serve every customer with quality product and timely shipping with highly responsibility. Being a young growing company, we might not the best, but we're trying our best to be your good partner.
By Kama from Iraq - 2017.09.26 12:12
The quality of the products is very good, especially in the details, can be seen that the company work actively to satisfy customer's interest, a nice supplier.
By Rose from Johannesburg - 2017.08.21 14:13
